Description
VERMES MDV3200F-HS-UF piezo jet valve is the exact model-specific item shown in this listing. Longi prepared this page from the supplied stock record and real product photographs so maintenance engineers can distinguish MDV3200F-HS-UF from visually similar products before purchase.
Stock and condition record: This listing is offered as used equipment-removal stock according to the supplied item note. The supplied item note reports normal function. Compare the complete model label, visible interfaces and installation details with the original part before purchase.
VERMES MDV3200F-HS-UF Piezo Jet Valve for MDS 3000 identification
This listing covers a piezo jet valve associated with VERMES. Its decisive identifier is MDV3200F-HS-UF. The model label, housing, interfaces, accessories and condition in the gallery belong to this stock item. A similar enclosure or family name is not sufficient evidence that another suffix, revision or option is interchangeable.
The page is intentionally written around this product’s functional role rather than a generic spare-parts template. Buyers should compare the old component, host equipment nameplate and the supplied photographs together. Longi can review those details before shipment, but final system suitability remains dependent on the complete equipment configuration.
Application-specific role
precision adhesive, solder-flux, coating or micro-volume fluid dispensing where repeatable shot formation depends on the correct wetted part and actuator geometry. In this context, the piezo jet valve is selected because its physical construction and system role match the maintenance task. It should not be chosen only because another item has a similar brand or outside shape.
Typical users include industrial maintenance teams, laboratory service engineers, instrument rebuilders and production-support technicians. This stock can be useful when the original part is damaged, discontinued or needed to shorten downtime, provided the exact model and installation details are confirmed first.
Compatible equipment and limits
The conservative compatibility basis for this listing is: VERMES dispensing platforms that specify MDV3200F-HS-UF, MDS3000; confirm controller generation, valve body, nozzle or tappet style, heater option and fluid compatibility. Longi does not claim universal compatibility with an entire brand family. Revisions can change electrical ratings, firmware, pin assignments, sensing elements, optical geometry, port sizes or mounting details even when two products look almost identical.
- Match the complete model code and every suffix against the removed part.
- Compare connectors, keying, cable direction, mounting holes, ports and overall dimensions.
- Confirm the host controller, instrument series, software or firmware option when applicable.
- Check all visible voltage, signal, pressure, optical, detector or measurement markings before installation.
Symptoms that may prompt inspection
System observations that may lead a technician to inspect this item include irregular dots, satellites, missed shots, delayed closure, nozzle blockage, leakage or a changed deposit volume; these symptoms can also come from fluid condition, pressure, waveform or setup. These are diagnostic prompts, not proof that this component is defective. A safe diagnosis should also examine wiring, power, fluid or gas supply, contamination, fixtures, software settings, calibration and upstream or downstream modules.
Before replacing a part, record the original alarm, measured values and machine state. Inspect the removed item for heat, corrosion, contamination, cracked housings, damaged connectors or loose mounting. Keeping those records helps distinguish a component fault from a broader system problem and reduces the chance of damaging a replacement.
Model-specific technical differences
For MDV3200F-HS-UF, the meaningful comparison points are valve or nozzle function, actuator family, orifice and wetted-part geometry, cable or pneumatic interface, heater provision and revision markings visible on the item. Only information supported by the source record, product label or supplied photos is presented as fact. Specifications that cannot be verified from those sources are deliberately left for confirmation instead of being invented.
- Brand: VERMES
- Model: MDV3200F-HS-UF
- Product type: piezo jet valve
- Catalog category: Valves
- Physical condition: shown in the real product photographs and summarized in the stock record above
- Testing statement: limited to the supplied record; no unsupported operating result is implied
- Listed price: $220.86
- Price note: The displayed price follows the recorded purchase cost, markup rule and exchange rate used when this listing was prepared.
Installation and verification
Qualified personnel should install and test this product. The recommended model-specific approach is to clean the fluid path, verify pressure and waveform limits, install without contaminating sealing surfaces, then tune and inspect the deposited pattern. Preserve the removed part until the replacement has passed the complete equipment test, since labels, wiring positions, settings and mechanical references may be needed during commissioning.
Electronic and detector assemblies require ESD protection. Optical, analytical and fluid-path parts require clean handling. High-voltage, laser, radiation, gas and pressure applications require the corresponding safety controls and competent personnel. Calibration, alignment, leak checking, parameter entry or software setup may still be required after a mechanically correct replacement.
Photo-based ordering checklist
- Compare the full MDV3200F-HS-UF label and suffix with your original item.
- Review every gallery image for connector, port, housing and accessory differences.
- Confirm whether your requirement is a complete unit, a replacement module or a service part.
- Send Longi the host-equipment model and installation photos if any compatibility point is uncertain.
- Request final stock and packing photos before shipment when documentation is important.
Packing and worldwide shipping
Longi packs this item according to its size and sensitivity. Electronic products receive anti-static protection where appropriate; optical, detector, glass and measuring components receive cushioning and surface protection; heavier modules are restrained to prevent movement. International shipment is available after order confirmation, with model and quantity checked again before dispatch.
Frequently asked questions
Can Longi confirm that MDV3200F-HS-UF fits my equipment?
Longi can compare your original label, host nameplate, connectors and installation photos with this stock. For the strongest check, include the complete equipment model, current fault information and photographs of both sides of the removed part.
Why are some specifications not listed?
The source material does not verify every possible parameter. Omitting an uncertain value is safer than copying a specification from a similar model. Longi can investigate a specific parameter when it is essential to your application.
Does replacing this item guarantee the fault will be cleared?
No. The symptoms above can have several causes. Installation should follow a documented diagnosis, and the complete system should be tested after replacement.
Reviews
There are no reviews yet.