Dani HSS-86.50 Heated Transfer Line for 7694E and G1888 Headspace Samplers

Description

Dani HSS-86.50 heated transfer line is supplied by Longi as a separately identified replacement item for industrial or laboratory equipment service. This product is a heated transfer-line assembly for headspace-sampler service. It is deliberately separate from the Dani HSS-86.50 valve listing because a transfer line has a different role, different physical connections and a different purchasing check. The original note identifies it as a heating transfer line for Dani HSS-86.50/86.50 Plus and related Agilent 7694, 7694E and G1888 headspace applications.

Dani HSS-86.50 heated transfer line identification

This product is a heated transfer-line assembly for headspace-sampler service. It is deliberately separate from the Dani HSS-86.50 valve listing because a transfer line has a different role, different physical connections and a different purchasing check. The original note identifies it as a heating transfer line for Dani HSS-86.50/86.50 Plus and related Agilent 7694, 7694E and G1888 headspace applications.

• Brand / equipment family: Dani headspace sampler family; listed for compatible Agilent 7694, 7694E and G1888 service
• Part type: Heated transfer-line assembly
• Primary application: Transfer path between headspace sampler sections
• Related models: Dani HSS-86.50 and HSS-86.50 Plus; verify exact equipment configuration
• Condition: Removed stock item represented by its own three-image record
• Purchase check: Compare line length, end fittings, heater cable, plug and mounting points

Function and application context

A heated transfer line is used to carry sample vapour along a controlled path between sections of a headspace system. The exact installation is instrument-specific. Buyers should assess the line length, end connectors, heater wiring, plug type, insulation condition and mounting route against the line being replaced. A similar-looking cable or tube should not be assumed to fit.

How to match the correct part

Use the actual product photographs together with the removed transfer line. Check both ends of the assembly, the heater lead, connector keying, visible fittings and the required routing inside the sampler. Confirm that the instrument is a Dani HSS-86.50 or HSS-86.50 Plus, or that the service documentation supports use on the intended Agilent 7694, 7694E or G1888 configuration.

Model matching should always be completed before payment or installation. Product titles are written to make the individual reference easy to find, while the physical part, labels and photos remain the final evidence. Longi can review those visible details with the buyer before dispatch, but this does not replace the equipment manufacturer’s documentation or site safety procedure.

Condition and inspection information

This listing represents one photographed transfer-line stock item. The source record describes it as a removed part, so ordinary installation marks can exist. Longi can check visible cable, fittings and external condition before packing. Analytical performance, heating output and final compatibility should be confirmed for the actual equipment installation.

For all used or removed equipment parts, buyers should allow for normal cosmetic evidence of storage or previous installation. The listing photographs are deliberately retained as part of the identification record. If a detail is important to your repair, ask for confirmation before ordering rather than assuming that a similar family name means the same revision.

Typical use

The assembly can be relevant to laboratories and service teams restoring a headspace sampler whose original heated line has damaged insulation, failed wiring, worn connectors or physical contamination. Its purpose is not interchangeable with a pressure or vent valve, which is listed separately.

Before ordering

Please send images of the old line from both ends, the sampler nameplate and the cable/connector markings. Longi can compare visible layout and provide protective packing information before dispatch.

• Match the full model or part reference, not only the equipment family.
• Compare connectors, fittings, mounting points and the actual product images.
• Keep the removed part available until the replacement has been identified and installed.
• Confirm any required test, firmware, configuration or safety checks with the qualified installer.

Packing and international delivery

Longi packs electronic modules, laboratory components and control parts according to their shape and fragility. Protective material is used around boards, mechanical assemblies, cables and exposed connectors. Buyers can request a final model comparison or packing confirmation before shipment. International delivery is arranged after the order details, recipient information and any required quotation are confirmed.

FAQ

How is this listing distinguished from a similar product? Why is the exact line important? Transfer-line length, fittings and heater connections can vary by instrument configuration. Matching the original assembly reduces installation risk and avoids buying a valve or cable that has a different function.

Can Longi confirm suitability? Longi can compare labels, photographs and visible installation details supplied by the buyer. The final decision must be based on the actual equipment, qualified service judgement and the precise part reference.